Engraving Cutters - Uncoated
Tipped off end provides extra strength and improves cutting. Leaves .010" flat at bottom of groove.
| Tool Number |
Angle Per Side |
T Tip Diameter |
Ramp Angle | Incl'd Angle | Size | Max Tip Diameter | Thread Size | R Corner Radius |
Pitch | D1 Cutter Diameter |
D2 Shank Diameter |
D3 Neck Diameter |
L1 Overall Length |
L2 Length of Cut |
L3 Reach from Tip |
L4 Neck Length |
D1 Decimal Diameter |
N Neck Diameter |
L Neck Length |
R Corner Radius Amount |
Angle Per Side |
Tip Diameter |
Max Back Chamfer |
F Non Cut Flat |
L2 Cutter Width |
D1 Pilot Diameter |
D Head Diameter |
Rad From Tip |
Depth of Cut |
Slot Depth |
Top Rad |
Bottom Rad |
Diameter Over Rad |
L3 Split Length |
D1 Drill Diameter |
Ramp Angle |
Price | Stock | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 35125-90 | 1/8" | 1/8" | 1-1/2" | .056" | 3/8" | $18.15 | 20 | ||||||||||||||||||||||||||||||||
| 35187-90 | 3/16" | 3/16" | 2" | .088" | 7/16" | $21.95 | 10 | ||||||||||||||||||||||||||||||||
| 35250-90 | 1/4" | 1/4" | 2" | .120" | 1/2" | $26.35 | 12 |