Chamfer Cutters - Back Chamfer - Uncoated
Used to chamfer or de-burr the backside of slots, thru holes and part projections. Cuts on the 45 Degree angle only. Flute face designed to evacuate chips for smooth finish. Circulr Interpolate the back side of most common hole diameters, and de-burr a variety of part configurations. Available Uncoated and AlTiN Coated.
1/8" Shank - 1-1/2" Overall Length
| Tool Number |
Angle Per Side |
T Tip Diameter |
Ramp Angle | Incl'd Angle | Size | Max Tip Diameter | Thread Size | R Corner Radius |
Pitch | D1 Cutter Diameter |
D2 Shank Diameter |
D3 Neck Diameter |
L1 Overall Length |
L2 Length of Cut |
L3 Reach from Tip |
L4 Neck Length |
D1 Decimal Diameter |
N Neck Diameter |
L Neck Length |
R Corner Radius Amount |
Angle Per Side |
Tip Diameter |
Max Back Chamfer |
F Non Cut Flat |
L2 Cutter Width |
D1 Pilot Diameter |
D Head Diameter |
Rad From Tip |
Depth of Cut |
Slot Depth |
Top Rad |
Bottom Rad |
Diameter Over Rad |
L3 Split Length |
D1 Drill Diameter |
Ramp Angle |
Price | Stock | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 11026 | .026" | .016" | .004" | .140" | .016" | .140" | .004x45 Deg | .008" | $54.90 | 12 | |||||||||||||||||||||||||||||
| 11036 | .036" | .024" | .006" | .175" | .024" | .175" | .005x45 Deg | .010" | $54.90 | 20 | |||||||||||||||||||||||||||||
| 11046 | .046" | .032" | .007" | .200" | .032" | .200" | .006x45 Deg | .015" | $52.50 | 20 | |||||||||||||||||||||||||||||
| 11056 | .056" | .040" | .008" | .300" | .040" | .300" | .007x45 Deg | .015" | $52.50 | 6 | |||||||||||||||||||||||||||||
| 11086 | .086" | .075" | .010" | .375" | .075" | .375" | .009x45 Deg | .020" | $48.60 | 10 | |||||||||||||||||||||||||||||
| 11116 | .116" | .090" | .013" | .575" | .090" | .575" | .012x45 Deg | .030" | $46.20 | 4 |