2 Flute - HP Profile Cutters for Deep Cavity - Ball End - AlTin Coated
Designed for milling cavities in molds.
Tapered neck reduces deflection.
3" O.A.L.
"Note: Miniature profile cutters are designed to mill deep cavities in molds. The tapered neck is available in various lengths to provide the most rigid tool for each application. Since interference with the cavity wall is a possibility (see diagram), we suggest the application be verified with CAD by your programmer.
Neck is reduced behind the cutter diameter for a length of one diameter."
Tapered neck reduces deflection.
3" O.A.L.
"Note: Miniature profile cutters are designed to mill deep cavities in molds. The tapered neck is available in various lengths to provide the most rigid tool for each application. Since interference with the cavity wall is a possibility (see diagram), we suggest the application be verified with CAD by your programmer.
Neck is reduced behind the cutter diameter for a length of one diameter."
| Tool Number |
Angle Per Side |
T Tip Diameter |
Ramp Angle | Incl'd Angle | Size | Max Tip Diameter | Thread Size | R Corner Radius |
Pitch | D1 Cutter Diameter |
D2 Shank Diameter |
D3 Neck Diameter |
L1 Overall Length |
L2 Length of Cut |
L3 Reach from Tip |
L4 Neck Length |
D1 Decimal Diameter |
N Neck Diameter |
L Neck Length |
R Corner Radius Amount |
Angle Per Side |
Tip Diameter |
Max Back Chamfer |
F Non Cut Flat |
L2 Cutter Width |
D1 Pilot Diameter |
D Head Diameter |
Rad From Tip |
Depth of Cut |
Slot Depth |
Top Rad |
Bottom Rad |
Diameter Over Rad |
L3 Split Length |
D1 Drill Diameter |
Ramp Angle |
Price | Stock | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 17031-500 | .031" | 1/4" | .047" | .500" | $61.80 | 8 | |||||||||||||||||||||||||||||||||
| 17062-500 | .062" | 1/4" | .094" | .500" | $61.80 | 20 | |||||||||||||||||||||||||||||||||
| 17093-750 | .093" | 1/4" | .140" | .750" | $61.80 | 17 | |||||||||||||||||||||||||||||||||
| 17125-750 | .125" | 1/4" | .187" | .750" | $61.80 | 15 | |||||||||||||||||||||||||||||||||
| 17031-750 | .031" | 1/4" | .047" | .750" | $66.60 | 20 | |||||||||||||||||||||||||||||||||
| 17031-100 | .031" | 1/4" | .047" | 1.00" | $71.10 | 10 | |||||||||||||||||||||||||||||||||
| 17047-500 | .047" | 1/4" | .071" | .500" | $61.80 | 24 | |||||||||||||||||||||||||||||||||
| 17047-750 | .047" | 1/4" | .071" | .750" | $66.60 | 13 | |||||||||||||||||||||||||||||||||
| 17047-100 | .047" | 1/4" | .071" | 1.00" | $71.10 | 11 | |||||||||||||||||||||||||||||||||
| 17062-750 | .062" | 1/4" | .094" | .750" | $66.60 | 25 | |||||||||||||||||||||||||||||||||
| 17062-100 | .062" | 1/4" | .094" | 1.00" | $71.10 | 24 | |||||||||||||||||||||||||||||||||
| 17078-750 | .078" | 1/4" | .118" | .750" | $61.80 | 41 | |||||||||||||||||||||||||||||||||
| 17078-100 | .078" | 1/4" | .118" | 1.00" | $66.60 | 23 | |||||||||||||||||||||||||||||||||
| 17078-125 | .078" | 1/4" | .118" | 1.25" | $71.10 | 22 | |||||||||||||||||||||||||||||||||
| 17093-100 | .093" | 1/4" | .140" | 1.00" | $66.60 | 4 | |||||||||||||||||||||||||||||||||
| 17093-125 | .093" | 1/4" | .140" | 1.25" | $71.10 | 27 | |||||||||||||||||||||||||||||||||
| 17125-100 | .125" | 1/4" | .187" | 1.00" | $66.60 | 9 | |||||||||||||||||||||||||||||||||
| 17125-125 | .125" | 1/4" | .187" | 1.25" | $71.10 | 10 |