2 Flute - Drill Mills - 60 Degrees - AlTin Coated
Recommended for non-ferrous materials.
| Tool Number |
Angle Per Side |
T Tip Diameter |
Ramp Angle | Incl'd Angle | Size | Max Tip Diameter | Thread Size | R Corner Radius |
Pitch | D1 Cutter Diameter |
D2 Shank Diameter |
D3 Neck Diameter |
L1 Overall Length |
L2 Length of Cut |
L3 Reach from Tip |
L4 Neck Length |
D1 Decimal Diameter |
N Neck Diameter |
L Neck Length |
R Corner Radius Amount |
Angle Per Side |
Tip Diameter |
Max Back Chamfer |
F Non Cut Flat |
L2 Cutter Width |
D1 Pilot Diameter |
D Head Diameter |
Rad From Tip |
Depth of Cut |
Slot Depth |
Top Rad |
Bottom Rad |
Diameter Over Rad |
L3 Split Length |
D1 Drill Diameter |
Ramp Angle |
Price | Stock | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 96125TL | 1/8" | 1/8" | 1-1/2" | 1/2" | $36.59 | 10 | |||||||||||||||||||||||||||||||||
| 96187TL | 3/16" | 3/16" | 2" | 5/8" | $39.06 | 9 | |||||||||||||||||||||||||||||||||
| 96250TL | 1/4" | 1/4" | 2-1/2" | 3/4" | $48.15 | 6 | |||||||||||||||||||||||||||||||||
| 96375TL | 3/8" | 3/8" | 2-1/2" | 1" | $66.45 | 4 | |||||||||||||||||||||||||||||||||
| 96500TL | 1/2" | 1/2" | 3" | 1" | $105.56 | 2 | |||||||||||||||||||||||||||||||||
| 96030TL | 1/32" | 1/8" | 1-1/2" | 3/32" | $36.59 | 36 | |||||||||||||||||||||||||||||||||
| 96045TL | 3/64" | 1/8" | 1-1/2" | 9/64" | $36.59 | 19 | |||||||||||||||||||||||||||||||||
| 96060TL | 1/16" | 1/8" | 1-1/2" | 3/16" | $36.59 | 8 | |||||||||||||||||||||||||||||||||
| 96094TL | 3/32" | 1/8" | 1-1/2" | 3/8" | $36.59 | 10 | |||||||||||||||||||||||||||||||||
| 96312TL | 5/16" | 5/16" | 2-1/2" | 13/16" | $59.39 | 12 |